TMS 2009-04a Fujicolor Crystal Archive Digital Type DPII
Page 4 of 6
When inspecting finished color prints, it is essential
that an illumination source will be used that has
superior spectral characteristics, adequately high
color temperature and sufficient brightness. This is
because results can appear different, depending on
light quality. For precise results, prints should be
examined under the conditions designated by ISO
3664-2000. As a general guide, the following
conditions are recommended.
Color Temperature: 5000±300 K
Average Illumination: 500 Lux or more
General Color Rendering Index: Ra 90 or
more*
* To attain these values, special fluorescent lamps
designed for color evaluation (e.g. EDL type) should
be used.
When inspecting finished prints, be careful to shut
out all external light and colored reflected light.
Fujicolor Crystal Archive DPII is available as
Glossy, Lustre, Matte and Silk surface.
Length
Width
50 m
(164 ft)
83.8m
(275 ft)
175.3 m
(575 ft)
10.2 cm (4 in.)
■
12.7 cm (5 in.)
■
15.2 cm (6 in.)
■
17.8 cm (7 in.)
■ ■
20.3 cm (8 in.)
■ ■
21.0 cm (8.3 in.)
■ ■
25.4 cm (10 in.)
■
30.5 cm (12 in.)
■
40.6 cm (16 in.)
■
50.8 cm (20 in.)
■
61.0 cm (24 in.)
■
76.2 cm (30 in.)
■
106.0 cm(41.7 in.)
■
127.0 cm (50 in.)
■
Note: Size availability may change without prior notice.
Availability depends on surface.
12. Control strips
9. Light sources for viewing
Processing control can be provided through the use
of FUJICOLOR CRYSTAL ARCHIVE PAPER
ControlStrips Process CP-40FA/43FA/47L/48S/49E
13. Markings (Box/Emulsion numbers
13.1 Box markings
13.2 Bag labelling
10. Paper surface available
13.3 Emulsion numbers
Emulsion numbering will be in ascending order from
P01 (with backprint) or Q01 (without backprint) at
introduction.
11. Sizes available
Note
FUJICOLOR paper is marked with a three-digit
emulsion number followed by an additional three digit
number which is provided for production control
purpose only. Should any problem arise with
FUJICOLOR CRYSTAL ARCHIVE PAPER TYPE
DPII, the additional three digit number suffix to the
emulsion number should be indicated on the claim.
14. Back printing
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales